DWX-42W

• Millable Material | Glass ceramics, Composite resin, PMMA
  Loadable Workpiece Shape

• Width | Maximum 40 mm
• Depth | Maximum 20 mm
• Height | Maximum 20 mm

Operating Speed | 0.24 to 70.9 in./min. (6 to 1,800 mm/min.)
Spindle Speed | 15,000 to 60,000 rpm
Rotary Axis Travel Angle | A axis | ±360°
Number of Burs Housed| 6
Attachable Bur| Shank diameter | 3 mm, dedicated milling bur

Compatible Compressed Air

Control Pressure | 0.3 MPA or more
Air Capacity | 39 L/min or more

Interface | USB, Ethernet (10 BASE-T/100 BASE-TX automatic switching)
Control Command Set | RML-1, NC code
Power Requirements | AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category II, IEC 60664-1), 2.1 A
Power Consumption | Approximately 190 W
Operating Noise

During operation | 70 dB(A) or less (when not cutting)
During standby | 48 dB(A) or less

External Dimensions | Width x Depth x Height | 19.0 x 22.0 x 23.6 in. (482 x 560 x 600 mm)
Weight | 135 lbs. (61 kg)
Installation Environment

Indoor use, Altitude | Up to 6,562 ft. (2,000m)
Temperature | 41 to 82 °F (5 to 28°C)
Humidity | 35 to 80%RH (no condensation)
Ambient pollution degree | 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage | 1,440 V
Long-term temporary overvoltage | 490 V

Included Items | Power cord, USB cable, Roland DG Software Package CD, setup guide, drain hoses, dedicated milling burs (4), detection pin, dummy pin, rotary axis correction jig, ATC magazine correction jig and screw, hexagonal screwdriver, hexagonal wrench, measuring cup, mounting screws (4), milling bur removal jig, coolant tank, waste receptacle, filters (2), regulator with stay and screws (2), maintenance kit, daily maintenance card, 6 mm air hose, coolant additive, MillBox CAM software, Ethernet cable